1. Define the output and duty
State continuous and peak output, electrical-load profile, runtime, start-stop pattern and operating location.
2. Check the product references
HS60 is listed at 8.5 kW, HSD120 at 12 kW and HSD180K at 180–260 kW. These figures are reference data, not a suitability decision.
3. Define fuel, gas and site conditions
For piston references, state the intended fuel, altitude, cooling and starting requirements. For gas-power inquiries, provide composition, pressure, flow, contaminants, moisture, load profile and site connections before compatibility is discussed.
4. Request the right records
Identify the selected model or family, configuration, duty, inspection or test-information request, target market questions and project stage. Availability must be confirmed for the project.
Maximum vs Continuous Power
HS60 specifies 8.5 kW maximum mechanical engine power and HSD120 specifies 12 kW maximum generator output. Neither maximum value is a continuous rating. Define continuous load, peak demand, starting loads and duty cycle, then request the appropriate rating and electrical configuration.
Fuel Calibration & Consumption
HS60 and HSD120 list gasoline (petrol), kerosene and diesel. Their 240 g/kW·h consumption figure applies to diesel only. Confirm calibration and operating data for the intended fuel before calculating runtime, fuel demand or cooling requirements.
