Thrust and duty
Set the required thrust, mission duration, speed, altitude and ambient conditions. Compare the maximum-thrust values as reference data, then confirm the operating duty for the project.
Compare nine WWP micro turbojets by maximum thrust, weight, dimensions, fuel flow and ECU data.
Compare thrust, weight, fuel and installation needs against the UAV mission.
Set the required thrust, mission duration, speed, altitude and ambient conditions. Compare the maximum-thrust values as reference data, then confirm the operating duty for the project.
Compare engine mass, diameter and overall length with the installation volume, mounting, center-of-gravity allocation, intake and exhaust route.
The WWP references list Jet A-1 or kerosene, a 5% oil-mix ratio and ECU control. Define the fuel layout, starting sequence and control interface.
Use the listed exhaust-temperature and fuel-consumption references to frame thermal and fuel-system questions. Request current configuration and project-relevant records directly.
Maximum thrust for each WWP group. Check individual engine weight, dimensions and fuel flow before selection.
Smallest WWP thrust classes.
Mid-range thrust classes for comparison.
Higher thrust classes with larger listed envelopes.
Largest WWP thrust classes; WWP1000 and WWP1100 include stated nozzle and altitude entries.
A dash means the model table does not list that field.
| Model | Maximum thrust | Weight | Diameter | Overall length | Maximum fuel consumption | Speed | Exhaust temperature | Fuel | Oil mix ratio | Engine control | Nozzle | Stated flight altitude | Output power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WWP5 | 5 N | 68 g | 25 mm | 53 mm | 18 ml/min | 60,000–350,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | — | — | — |
| WWP20 | 20 N | 275 g | 55 mm | 105 mm | 70 ml/min | 50,000–280,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | — | — | — |
| WWP60 | 60 N | 845 g | 83 mm | 245 mm | 190 ml/min | 40,000–165,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | — | — | — |
| WWP100 | 100 N | 1,080 g | 110 mm | 265 mm | 260 ml/min | 42,000–116,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | — | — | — |
| WWP200 | 200 N | 2,510 g | 130 mm | 350 mm | 730 ml/min | 32,000–112,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | — | — | — |
| WWP400 | 400 N | 3,550 g | 147 mm | 350 mm | 1,300 ml/min | 30,000–98,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | — | — | — |
| WWP800 | 800 N | 7,250 g | 202 mm | 420 mm | 2,400 ml/min | 20,000–70,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | — | — | — |
| WWP1000 | 1,000 N | 12,500 g | 205 mm | 430 mm | 2,400 ml/min | 20,000–70,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | Swirl atomizing nozzle | 12,000 m | — |
| WWP1100 | 1,100 N | 22 kg | 272 mm | 625 mm | 2,540 ml/min | 20,000–60,000 rpm | 480–750°C | Jet A-1, kerosene | 5% | ECU | Swirl atomizing nozzle | >10,000 m | 750 W |
Compare required thrust and duty with listed mass, diameter, overall length, fuel consumption, speed, exhaust-temperature, fuel and ECU entries. Confirm operating limits, configuration and availability for the intended installation.
A thrust value alone does not define the installed system. Confirm mounting, intake, exhaust, thermal separation, fuel arrangement, ECU/control, altitude, ambient conditions and required records for the selected project.
State the platform, required thrust, flight profile, duty, altitude and ambient conditions.
Compare thrust, mass, diameter, length and maximum fuel-consumption entries across the nine WWP references.
Set the mounting, intake, exhaust, thermal separation, fuel and ECU/control boundaries.
Identify the model, configuration, documents, records and commercial questions that need direct confirmation.
Fuel, ECU, thrust, operating limits and technical-data requests.
WWP5, WWP20, WWP60, WWP100, WWP200, WWP400, WWP800, WWP1000 and WWP1100 span maximum-thrust entries from 5 N to 1,100 N. Use the model table to compare mass, envelope and fuel-consumption data.
Compare required thrust and duty with mass, diameter, overall length, maximum fuel consumption, speed, exhaust temperature, fuel, oil-mix ratio and ECU data. Define mounting, intake, exhaust and thermal boundaries for the installation.
WWP specifications list Jet A-1 or kerosene fuel, a 5% oil-mix ratio and ECU control across the nine models. Confirm the final fuel-system configuration, start sequence and control interface for the project.
Each WWP model table shows a maximum fuel-consumption reference in ml/min. Use it to define fuel-system questions and compare WWP models; do not treat it as a mission fuel-burn guarantee because the data does not establish final installation or operating conditions.
WWP model specifications list an exhaust-temperature range of 480–750°C. This is a selection input for exhaust routing and thermal separation; the installed thermal design requires project-specific review.
WWP1000 lists a stated flight altitude of 12,000 m and WWP1100 lists a stated flight altitude above 10,000 m, together with a swirl atomizing nozzle. These values require confirmation for the selected mission and operating conditions.
Yes. The WWP1100 specification lists 750 W output power alongside its 1,100 N maximum-thrust entry. The model data remains a reference set and final configuration must be confirmed.
Most WWP model pages use product reference visuals. WWP800 and WWP1000 use a shared WWP family image; request model-specific product information for the project review.
Include the selected model or thrust class, platform, target thrust, mission duty, altitude, fuel arrangement, mass and envelope constraints, mounting, ECU/control, intake, exhaust, thermal requirements, quantity, stage and required documents.
No. The comparison table consolidates model parameters. Final suitability, configuration, availability, performance and documentation must be confirmed for the selected application and project.
Include the mission, package, fuel, ECU, exhaust and document requirements.
Inspect the full parameters for each short-listed micro turbojet.
HIGH-SPEED UAVApply the comparison to thrust, fuel, ECU, exhaust and thermal requirements.
TURBOJET RFQInclude mission duty, envelope and document requirements for review.